The first wax-free release agent that really works on any type of part.

Technology designed to prevent the accumulation of residues on the cold surfaces of the mould as well as on the chill-vents and vacuum filters, thus minimising the appearance of porosity and brown spots on the parts.

NEOSIL products allow the demoulding of complex parts of any size.

Designed for:

BENEFITS

Thanks to its innovative molecule, NEOSIL does not leave residues at low temperature areas like chill-vents, vacuum filters… even after several days of work. This characteristic results in an important reduction of porosity defects.

TRADITIONAL RELEASE AGENT

NEOSIL

Mould surface

Chill-vents

  • Accumulation of solid wax in cold areas, mould and filters.
  • Non-homogeneous surface
  • No residues in die and parts
  • Non-homogeneous surface

Vacuum filters

NEOSIL keeps filters clean even after several days of use.

The traditional release agent requires filter cleaning every 8 hours.

NEOSIL saves you time and money thanks to a drastic reduction in cleaning stops.

 

 

NEOSIL performs better than traditional release agents when working in high temperature conditions due to its innovative molecule.

TRADITIONAL RELEASE AGENT

NEOSIL

Part surface

Part surface

  • Solid residue formation at 350°C
  • Burned residues
  • Non-homogeneous film
  • Almost no solid residue formation at 350°C
  • Burned residues
  • Homogeneous film

          Solid waste test

              Solid waste test

                              5 min

20 min

40 min




Temperature
350ºC

5 min

20 min

            40 min

TGA COMPARISON NEOSIL AND TRADITIONAL RELEASE AGENT

TGA DESMOLDEANTE ALTA RESISTENCIA TEMPERATURA

The stability of NEOSIL is superior to that of a traditional release agent. Thanks to its innovative formulation, NEOSIL deteriorates less and is more effective as it withstands demoulding better.

COD OF DIFFERENT RELEASE AGENTS (dilution: 1% in water)

Comparison between a product formulation without and with NEOSIL.

Casos de éxito

High stability coolants


Application: Machining

Solution: METALCOOL 112


MORE INFO

Better finishes, less clogging and higher productivity


Application: High Pressure Die Casting

Solution: CASTFLOW 9000


MORE INFO

Recirculation systems with no contamination


Application: High Pressure Die Casting

Solution: CASTFLOW 8058


MORE INFO

NEOSIL

Saves you time and money

Request more information on the first wax-free release agent that really works